Industrial sector
NDT and quality technologies
Digital radiography and CT for porosity and inclusions in castings and 3D-printed components, UT for composites and joints, XRF to verify the alloy at incoming inspection.
Industrial sectors • NDT • Automation • Italy
Non-destructive testing and industrial inspection for aerospace.
DIPITECH helps aerospace companies choose industrial radiography, CT, ultrasonic testing, XRF/PMI analysis, borescopes and automation, with technical support in Italy and Southern Europe.
Industrial sector
Where non-destructive testing matters in aerospace.
On turbines, engines, castings and additively manufactured components, inspection has to find internal and surface defects without damaging high-value hardware, and leave records that hold up in customer audits.
Industrial sector
Automation and workflows
Robotics, software and traceability to make series inspection repeatable and link every image or measurement to the part serial number.
Industrial sector
Technical support
We help you select and configure the system for the real application, from the initial evaluation to the quote and first use.
Methods, standards and personnel qualification are summarized on the non-destructive testing page.
Typical applications and requests.
turbinesenginescastingsadditive manufacturingstructural componentsaerospace quality
DIPITECH approach
What to evaluate before selecting
The technology follows the defect and its minimum size. A delamination in a composite calls for UT, a surface crack for eddy current, and inside engines and turbines you need a borescope whose probe diameter and length fit the access. After that, the manufacturer’s specification and the number of parts to inspect drive the choice.
Evaluation output
- Recommended technology and possible alternatives.
- Technical requirements, accessories, software and integration.
- Commercial and application next steps.
FAQ
Frequently asked questions
The questions we hear most often before a technical evaluation or a quote.
Which technologies can DIPITECH evaluate for this industry?
Digital radiography and CT, UT and PAUT, eddy current, borescopes and XRF/PMI analyzers. When inspection runs in series we also evaluate automation and software.
Where does a technical evaluation start?
From a description of the part and the inspection: material, geometry, target defect and its minimum size, governing specification, volumes and required documentation. With this information we prepare a proposal and the quote.
Can DIPITECH also support installation and training?
Yes, for fixed systems DIPITECH coordinates installation, start-up and operator training with the manufacturer. For portable instruments such as borescopes and XRF analyzers, we help you with configuration and first use.
Contact
Need to evaluate an inspection on aerospace parts?
Send us a request: the form goes directly to info@dipitech.com and we reply within 24 hours.
Application request
Tell us about the part and the inspection.
Include component, material, target defect and governing specification.