Industrial sector
NDT and quality technologies
Real-time X-ray and CT for porosity and shrinkage in cast parts, CT for internal defects and electrode alignment in battery cells, XRF to verify incoming alloys.
Industrial sectors • NDT • Automation • Italy
Non-destructive testing and industrial quality for automotive.
DIPITECH supports automotive manufacturers and their suppliers with industrial radiography, CT, XRF/PMI analysis, automation, robotics and quality software for series production and critical components.
Industrial sector
Where inspection matters in automotive production.
On aluminum castings, battery cells and modules, welds and assemblies, inspection has to keep up with the line and leave traceable data for every part.
Industrial sector
Automation and workflows
Robots and AMRs to bring parts to the test stations, with software that links every result to the part code and batch.
Industrial sector
Technical support
We help you select and configure the system for your production cycle, from the initial evaluation to the quote and first use.
To choose the right inspection method for castings, welds and components, see the overview of non-destructive testing.
Typical applications and requests.
castingsEV batteriesassembliescritical componentsproduction linesquality traceability
DIPITECH approach
What to evaluate before selecting
The technology follows the defect and the throughput. Start by deciding whether you need to check 100% of parts within the cycle time or only a sample, because that determines the choice between in-line radioscopy and CT. After that, the minimum defect size, any internal passages that need a borescope and the link to the quality system drive the choice.
Evaluation output
- Recommended technology and possible alternatives.
- Technical requirements, accessories, software and integration.
- Commercial and application next steps.
FAQ
Frequently asked questions
The questions we hear most often before a technical evaluation or a quote.
Which technologies can DIPITECH evaluate for this industry?
Radioscopy and CT, XRF/PMI analyzers, borescopes, robots and AMRs, and quality software for traceability.
Where does a technical evaluation start?
From a description of the part and the line: material, geometry, critical defect, cycle time, volumes and traceability requirements. With this information we prepare a proposal and the quote.
Can DIPITECH also support installation and training?
Yes, for fixed inspection systems and robots DIPITECH coordinates installation, start-up and operator training with the manufacturer. For portable instruments such as XRF analyzers and borescopes, we help you with configuration and first use.
Contact
Need to evaluate an inspection on your line?
Send us a request: the form goes directly to info@dipitech.com and we reply within 24 hours.
Application request
Tell us about the part and the line.
Include component, material, critical defect, cycle time and volumes.