Industrial sector
NDT and quality technologies
Digital radiography and PAUT or TOFD for welds, ultrasonic corrosion mapping, borescopes for heat exchangers and piping, XRF/PMI to verify plant materials.
Industrial sectors • NDT • Automation • Italy
NDT technologies for energy, oil & gas and asset integrity.
DIPITECH supports energy and oil & gas companies with industrial radiography, PAUT and TOFD ultrasonic testing, RVI, XRF/PMI analysis and digital data management for welds, pipelines and maintenance.
Industrial sector
Where non-destructive testing matters in plants and pipelines.
On pipelines, refinery piping, pressure vessels and heat exchangers, inspection qualifies welds during construction and measures corrosion and damage in service, with data you can compare from one turnaround to the next.
Industrial sector
Automation and workflows
Encoded scanners, software and digital archiving to make scans repeatable and compare readings, images and reports between campaigns.
Industrial sector
Technical support
We help you choose instrument, probes and accessories for the real plant and, after the purchase, keep you in direct contact with the manufacturer for service and spare parts.
The tests normally performed on welds, with the governing standards, are described on the page about non-destructive testing (NDT).
Typical applications and requests.
pipelinesweldsrefineriesplantsasset integritymaintenance
DIPITECH approach
What to evaluate before selecting
The technology follows the weld and the damage you are looking for. For wall loss, for example, a thickness gauge is enough on known points, while mapping is needed when it is widespread or its location is unknown. After that, wall thickness and diameter, code or standard, access to the component and, for field radiography, radiation protection drive the choice.
Evaluation output
- Recommended technology and possible alternatives.
- Technical requirements, accessories, software and integration.
- Commercial and application next steps.
FAQ
Frequently asked questions
The questions we hear most often before a technical evaluation or a quote.
Which technologies can DIPITECH evaluate for this industry?
Radiography, PAUT and TOFD, UT gauging and corrosion mapping, borescopes and XRF/PMI analyzers, along with software to archive and compare inspection data.
Where does a technical evaluation start?
From a description of the component and the inspection: material, diameter and wall thickness, type of weld or damage, governing code or standard, access and field conditions. With this information we prepare a proposal and the quote.
Can DIPITECH also support installation and training?
Yes, for fixed systems DIPITECH coordinates installation, start-up and operator training with the manufacturer. For field instruments such as UT gauges, borescopes and XRF analyzers, we help you with configuration and first use.
Contact
Need to evaluate an inspection on your plant?
Send us a request: the form goes directly to info@dipitech.com and we reply within 24 hours.
Application request
Tell us about the component and the inspection.
Include the component, what you need to inspect and the standard to meet.